Browse repository
601-660 of 1854 results
 8 / 9 / 10 / 11  / 12 / 13 / 14 
    Previous / Next    
ID  1051  -  Public access
Description :   Collection of spherical bead covers from a belt. The beads were made with some kind of perishable material that was lost. Resin spheres within spherical gold sheaths like these, have been found in other tombs. This artifact was placed next to a collection of flutes.
[See more]
ID  1053  -  Public access
Description :   Collection of tubular and circular beads of different sizes. Some of these are pre-forms of beads (segments of gold tubes that have been marked but not cut).
[See more]
ID  1055  -  Public access
Description :   Circular and bi-conical beads, and preforms of beads (collected from a sieve).
[See more]
ID  1057  -  Public access
Description :   Small circular gold beads.
[See more]
ID  1058  -  Public access
Description :   Small circular and cylindrical gold beads, and one pre-form bead.
[See more]
ID  1059  -  Public access
Description :   Tubular gold bead.
[See more]
ID  1060  -  Public access
Description :   Circular, cylindrical, and tubular gold beads. The image also shows a green circular bead made from a sedimentary rock containing glauconite, a mineral that gives the bead its dark green colour.
[See more]
ID  1061  -  Public access
Description :   Circular beads and cylindrical beads of two different sizes.
[See more]
ID  1063  -  Public access
Description :   Hammered gold cuff with figurative designs engraved in the Conte style belonging to the mortuary ensemble of individual I2 in tomb T1. Two anthropomorphic crocodiles in profile, bound by a belt, walk upright in the opposite direction. The cuff has four orifices to introduce the ties. It is of a similar design to its counterpart, cuff AU10251.
[See more]
ID  1064  -  Public access
Description :   Hammered gold cuff with figurative designs engraved in the Conte style belonging to the mortuary ensemble of individual I2 in tomb T1. Two anthropomorphic crocodiles in profile, bound by a belt, walk upright in the opposite direction. The cuff has four orifices to introduce the ties. It is of a similar design to its counterpart, cuff AU10250.
[See more]
ID  1066  -  Public access
Description :   Tubular beads. They possibly formed part of a necklace or shin guard. They were found alongside a collection of bone flutes; an artifact of spherical wood beads with gold covers (AU10476); a bell with an elongated handle (AU10344); two pendants which represent a hybrid crocodile-feline with claws; and various other artifacts. This packet was found in the South-East corner of the burial pit on the third level of tomb T2.
[See more]
ID  1067  -  Public access
Description :   Gold bell pendant cast in the shape of an owl with folded wings. The suspension ring is located at the rear. Conte style.
[See more]
ID  1068  -  Public access
Description :   Gold ear rod sheath. Tubular ear rods, or bar type ear rods, have two gold sheaths at their ends similar to this one.
[See more]
ID  1070  -  Public access
Description :   Ear rod sheaths (2). Tubular ear rods, or bar type ear rods, have two gold sheats at their ends similar to these. When the ear rod has a woodden body, only its sheats are found.
[See more]
ID  1071  -  Public access
Description :   Ear rod sheath. Tubular ear rods, or bar type ear rods, have two gold sheaths at their ends similar to this one.
[See more]
ID  1072  -  Public access
Description :   Figurative cast gold pendant in the shape of a female swimming crab. It is a naturalistic representation, although very simplified due to the small size of the pendant. It has two rings behind the cephalothorax for suspension. Conte style. The figure is very compact, emphasizing the cephalothorax, which is smooth and trapezoidal, from where three pairs of ambulatory legs come out to the sides and one to the front. At the front is the face with two round eyes protruding to the sides, a cast pair of antennae pointing upwards, and two pairs of buccal appendages. At the other end, the abdomen is...
[See more]
ID  1074  -  Public access
Description :   Tubular gold ear rods.
[See more]
ID  1075  -  Public access
Description :   Gold cuff. It has four perforations. This is the counterpart of the cuff with registration number AU11870.
[See more]
ID  1076  -  Public access
Description :   Gold cuff. It has four perforations. This is the counterpart of the cuff with registration number AU11866.
[See more]
ID  1077  -  Public access
Description :   Resin figure with some elements encased in gold. It represents a supernatural being in the form of an anthropomorphic fisherman bat standing, limbs open, holding two sharks with its hands. Late Conte style. The body and attitude of the figure are what give it its anthropomorphic character. With legs slightly open and flexed, and arms wide open at shoulder level, the hands grasp the fish at the base of one of their pectoral fins. It wears a belt from which hang, at the front, a trapezoidal skirt that reaches the knees, and at the back two wide bands fringed with curved triangles, which fall to...
[See more]
ID  1078  -  Public access
Description :   Necklace of spherical resin beads, covered in gold sheaths.
[See more]
ID  1079  -  Public access
Description :   Cast gold pendant with three felines. Conte Metallurgical Group. The animals, which are in a crouching position, grasp with their four paws two bars that hold them together. The bar held in their forelimbs has three suspension rings. The heads of the figures have large mouths which display two rows of square teeth; flat noses on the sides of which are found, four pronounced whiskers like moustaches; round bulging eyes and rounded raised alert ears. The bodies are rounded in shape with a thick tail raised at the end. The paws have an irregular number of claws, between six and eight. ...
[See more]
ID  1081  -  Public access
Description :   Belt made up of 52 spherical beads. All that remains of the beads are the gold sheaths. It is possible that the beads were made of wood or resin, or some other type of perishable material.
[See more]
ID  1082  -  Public access
Description :   Pendant made of an amber-coloured crystalline rock. It represents a quadruped in profile, with a tail raised over its back. It has one perforation.
[See more]
ID  1083  -  Public access
Description :   Pendant that represents a rodent eating.
[See more]
ID  1084  -  Public access
Description :   Pendant that represents an animal with its tail rose over its back.
[See more]
ID  1085  -  Public access
Description :   Pendant that represents a crocodile with its head turned towards the back.
[See more]
ID  1088  -  Public access
Description :   Extremely fragmented laminar artifact made of gold and copper of which remains a curved rim. This rim leads us to believe that it could be the remains of a butterfly shape breastplate like those associated with individual I7 of this tomb. It was found above the remains of individual I4’s head.
[See more]
ID  1090  -  Public access
Description :   Breastplate made of a hammered gold and copper alloy in the form of a stylised butterfly in flight with an embossed central body. In the upper part of the plate there is one of the two or more holes for hanging or sewing that would have almost certainly been used to allow the piece to be worn. Conte Metallurgical Group The sheet, which is of a semicircular shape, has a slightly fusiform figure embossed on its central axis with a thickening of the upper middle part, which gives the pectoral a certain resemblance to a very stylized butterfly in flight. Its four wings would have been cast in ...
[See more]
ID  1092  -  Public access
Description :   Hammered gold cuff. On its central part, next to the edge, it has an embossed image (3.8cm) of a supernatural being in the form of an anthropomorphic bat. The cuff has two pairs of opposing perforations at its upper and lower ends to allow it to be tied. Conte Metallurgical Group. The figure walks to its right but turns its torso, from whose back emerge two triangular wings, and its head towards the front. The arms are open and in each hand a cane is grasped. The head, with a flattened skull, has a trapezoidal face with a straight forehead, large round eyes within deep sockets, a wide nos...
[See more]
ID  1093  -  Public access
Description :   Hammered gold cuff. On its central part, next to the edge, it has an embossed image (3.8cm) of a supernatural being in the form of an anthropomorphic bat. The cuff has two pairs of opposing perforations at its upper and lower ends to allow it to be tied. Conte Metallurgical Group. The figure walks to its left but turns its torso, from whose back emerge two triangular wings, and its head towards the front. The arms are open and in each hand a cane is grasped. The head, with a flattened skull, has a trapezoidal face with a straight forehead, large bulging round eyes, a narrow nose, pointed ...
[See more]
ID  1094  -  Public access
Description :   Belt of spherical beads (58). Of these beads only the gold sheaths with which they were covered have been conserved. It is probable that the beads were made of wood.
[See more]
ID  1096  -  Public access
Description :   Tubular gold ear rod.
[See more]
ID  1097  -  Public access
Description :   Tubular gold ear rod. This ear rod is the counterpart of ear rod AU12018.
[See more]
ID  1098  -  Public access
Description :   Gold breastplate in the shape of a stylized butterfly in flight. It has four perforations, to allow it to be hung or sewn to clothing, in the upper part of the plate. Conte Metallurgical Group From an embossed central axis consisting of two strips joined together and separated in the centre, leaving a fusiform space, the shape of the plate suggests a pair of concave semicircular wings, which gives the piece a certain resemblance to a very stylised butterfly in flight. Its four wings would have been cast in twos. The head, thorax and abdomen are condensed into a fusiform element surrounded...
[See more]
ID  1099  -  Public access
Description :   Set of gold ear rods (2 pairs). They were found together on one side of individual I7’s body. They were probably inside a package placed there. Two of the ear rods were made of wood, with sheaths and caps made of gold (in the photo, the two upper ear rods). The other two are made of stone, with sheaths and caps made of gold (the two ear rods at the bottom of the photograph). Typologically, the two pairs of ear rods are similar, although they are made with different materials.
[See more]
ID  1102  -  Public access
Description :   Pendant in the shape of a chisel or inverted “T”. It features a completely polished surface and a suspension hole.
[See more]
ID  1103  -  Public access
Description :   Drilled canines. They were found at hip-height of individual I12 and for this reason the object has been interpreted as the remains of a belt.
[See more]
ID  1105  -  Public access
Description :   Flute made from a long bone of a feline. It is decorated with “yc”, “v”, and dot designs. It also features five air outlet holes, and a suspension hole.
[See more]
ID  1106  -  Public access
Description :   Drilled canines. These canines have been interpreted as components of a belt, since they were found at the height of an individual's waist.
[See more]
ID  1110  -  Public access
Description :   Resin zoomorphic pendant.
[See more]
ID  1111  -  Public access
Description :   Globular vessel with a long curved neck, and a thickened rim. It features white slip on which was applied the decoration consisting of areas of red and purple, joined in a semicircle in the form of an arc, on the shoulder of the piece.
[See more]
ID  1112  -  Public access
Description :   Jar with a flat base, carinated body, convex angular shoulders, an extended neck, and a laterally displaced rim. Red slip.
[See more]
ID  1113  -  Public access
Description :   Globular vessel with a straight rim. Red slip.
[See more]
ID  1116  -  Public access
Description :   Small globular jar with a ring base, long neck, a laterally displaced rim, and a spout handle.
[See more]
ID  1117  -  Public access
Description :   Miniature bowl with a low pedestal, a convex body, and a collared rim. The black surface is due to the firing of the piece in a confined space.
[See more]
ID  1118  -  Public access
Description :   Globular vessel with a long neck and a laterally displaced rim. It features a white slip on which is painted, on the body, geometric patterns framed by red bands. The neck is decorated with red and purple bands, and the neck is painted with black lines with suspended dots.
[See more]
ID  1119  -  Public access
Description :   Jar with a ring base, globular body, long neck, and a straight rim. It has red slip on the exterior surface except on the interior of the base.
[See more]
ID  1120  -  Public access
Description :   Effigy vessel in the form of an owl. It has a curved base, globular body, short neck, and a thickened rim. It features cream-colored slip on which narrow white bands have been applied. There is also a red band on the interior rim.
[See more]
ID  1121  -  Public access
Description :   Globular jar with a short, slightly everted neck. It has white slip, on which spirals with claws at the ends have been painted. It has a purple band on the shoulder, and a red band on the neck and rim.
[See more]
ID  1122  -  Public access
Description :   Dark-gray trapezoidal axe. The suface is hewn. The functional part, the distal end, is polished.
[See more]
ID  1123  -  Public access
Description :   Stone projectile tip. It was made from a chip of red chalcedony and the stem has been retouched.
[See more]
ID  1124  -  Public access
Description :   Stone projectile tip. It is made from a chip of translucent white quartz. Retouching is present on the stem.
[See more]
ID  1125  -  Public access
Description :   Stone projectile tip. It was made from a chip of translucent white quartz. Retouching is present on the stem.
[See more]
ID  1126  -  Public access
Description :   Stone projectile tip made from a chip of red chalcedony. The stem, one of the edges, and the central ridge have been retouched.
[See more]
ID  1127  -  Public access
Description :   Stone projectile tip made from a chip of quartz or white chalcedony, which is opaque. The stem has been retouched.
[See more]
ID  1128  -  Public access
Description :   Collection of stone projectile tips made from chips of red chalcedony. All of the stems have been retouched.
[See more]
ID  1129  -  Public access
Description :   Stone projectile tips made from chips of red and white chalcedony.
[See more]
ID  1130  -  Public access
Description :   Trapezoidal dark gray pointed axe. It features a hewn surface and is partially pitted. The distal (working) part of the artifact has been ground and polished.
[See more]
ID  1131  -  Public access
Description :   Dark-gray trapezoidal axe. It has a ground surface.
[See more]
601-660 of 1854 results  
 8 / 9 / 10 / 11  / 12 / 13 / 14 
    Previous / Next    
"Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0. International license."